Best Quality HPE0-S59 Exam Questions HP Test To Gain Brilliante Result!
Preparations of HPE0-S59 Exam 2024 HPE Technical Unlimited 81 Questions
HP HPE0-S59 (HPE Compute Solutions) certification exam is designed to validate the skills and knowledge of IT professionals in HPE Server Solutions. HPE0-S59 exam tests individuals' understanding of HPE compute technologies and solutions, including server architectures, software-defined infrastructure, cloud-based solutions, and more. The HPE0-S59 exam enables candidates to demonstrate their expertise in designing, deploying, and managing server solutions based on HPE technology.
NEW QUESTION # 26
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 27
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- B. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- C. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- D. Enable FC primary and secondary boot on the modules through the HPE OneView interface
Answer: B
Explanation:
To use FC (Fibre Channel) as a storage access protocol with HPE Primera to boot HPE Synergy compute nodes, you must add FC upgrade licenses in HPE OneView. These licenses enable FC connectivity for the HPE Virtual Connect SE 100Gb F32 Modules, allowing the compute nodes to connect to the FC storage.
NEW QUESTION # 28
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. The customer can add one D3940 storage Module to each of the frames
- B. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- C. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- D. To use all compute nodes, the customer must create at least two logical enclosures
Answer: D
Explanation:
In an HPE Synergy environment, a logical enclosure represents a management domain that groups multiple Synergy frames and their associated compute, storage, and fabric resources. Given the setup with 3 HPE Synergy 12000 Frames and the specified components, the customer must create at least two logical enclosures to effectively manage all compute nodes and resources across multiple frames. This ensures proper resource allocation, management, and redundancy.
NEW QUESTION # 29
What is a limitation when creating a server profile?
- A. Administrator cannot define more than 8 connections within a server profile
- B. ILO management is limited to the integration with Active Directory or LDAP
- C. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- D. It is not possible to create shared volumes on demand through a server profile
Answer: D
Explanation:
A limitation when creating a server profile in HPE OneView is that it is not possible to create shared volumes on demand directly through a server profile. Server profiles in HPE OneView are used to define and manage the configuration of compute nodes, including network connections, BIOS settings, and boot order, but they do not have the capability to dynamically create or manage shared storage volumes.
NEW QUESTION # 30
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments are licensed per node not per physical socket
- B. All new HPE SimpliVity models are based on AMD CPUs
- C. All new HPE SimpliVity models support deduplication and compression
- D. New HPE SimpliVity deployments give customer flexible choice of hypervisor
Answer: C
NEW QUESTION # 31
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All logical interconnects configured using this logical interconnect group will be automatically updated
- B. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- C. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
- D. All logical interconnects configured using this logical Interconnect group will report inconsistency
Answer: B
NEW QUESTION # 32
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame
Which statement about this setup is true?
- A. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.
- B. The customer must create at least five logical enclosures for this setup.
- C. To manage 15 frames, additional HPE Composers are required.
- D. If properly cabled, any compute node can access any HPE D3490 storage module
Answer: B
Explanation:
With 15 HPE Synergy 12000 frames, the customer must create multiple logical enclosures to manage the setup efficiently. HPE Synergy typically supports up to five frames per logical enclosure, meaning that at least five logical enclosures would be necessary to manage all 15 frames. This ensures proper organization, management, and scalability of the resources.
NEW QUESTION # 33
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE Superdome Flex system with its respective feature:
* HPE Superdome Flex
* Support for 32 sockets and 48TB of memory
* Support for nPar with 16 sockets
* HPE Superdome Flex 280
* Maximum of 24TB memory
* Minimum of 768 GB of memory
* HPE Superdome Flex:
* Support for 32 sockets and 48TB of memory:The HPE Superdome Flex system is designed for extremely large-scale workloads and can support configurations with up to 32 CPU sockets and
48TB of memory.
* Support for nPar with 16 sockets:This system supports nPartitions (nPars) with configurations that can include up to 16 CPU sockets, providing flexible partitioning and resource allocation.
* HPE Superdome Flex 280:
* Maximum of 24TB memory:The HPE Superdome Flex 280 supports a maximum memory capacity of 24TB, suitable for large but not as massive workloads compared to the full Superdome Flex.
* Minimum of 768 GB of memory:The minimum memory configuration for the HPE Superdome Flex 280 is 768 GB, ensuring a base level of performance and capacity for smaller deployments.
NEW QUESTION # 34
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2 Why would you recommend this change?
- A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
- B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
- C. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort
- D. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
Answer: B
Explanation:
HPE Composer 2 offers enhanced scalability compared to HPE Composer 1. While HPE Composer 1 and HPE OneView support up to 21 frames, HPE Composer 2 extends this limit, allowing for greater scalability and more efficient management of larger HPE Synergy environments. This makes HPE Composer 2 a suitable recommendation for customers needing to manage more than 21 frames.
NEW QUESTION # 35
Which statement about HPE Superdome Flex 280 is true?
- A. It supports 2 to 8 sockets in 2-socket increments.
- B. it cannot be managed using HPE OneView.
- C. It can support up to two nPars with an external RMC.
- D. It must be equipped with at least 768 GB of memory.
Answer: D
NEW QUESTION # 36
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
- B. HPE Synergy 12 Gb SAS Connection Module
- C. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
- D. HPE virtual Connect SE 32 Gb FC Module for Synergy
Answer: C
Explanation:
A logical interconnect group in HPE Synergy is used to define a consistent network configuration across multiple frames. The HPE Virtual Connect SE 100 Gb F32 Module for Synergy allows for logical interconnect groups to span across multiple frames. This is because the 100 Gb module supports high-speed connectivity and the necessary infrastructure to maintain consistent network configurations over multiple frames, which is essential for scalable and flexible Synergy environments.
NEW QUESTION # 37
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis. Which statement about workload availability during expansion is true?
- A. Powered nPar can be expanded only if HPE Superdome Flex 280 is used
- B. HPE Superdome Flex does not support expansion of powered on nPars
- C. Online expansion is available only if RMC is used for management.
- D. Powered nPar can be expanded if it does not use HPE Persistent Memory
Answer: D
Explanation:
HPE Superdome Flex allows for the expansion of powered-on nPars (nPartitions), but this capability is subject to certain conditions. One of these conditions is that the nPar does not use HPE Persistent Memory. Expanding an nPar with Persistent Memory typically requires a shutdown to reconfigure the memory settings safely.
NEW QUESTION # 38
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
- A. For Brocade switches, a logical interconnect group must be created in HPE OneView.
- B. SAS switches must be moved to second fabric and FC modules Installed in the first one.
- C. For VC-FC modules, all of server facing ports must be property licensed.
- D. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
Answer: B
NEW QUESTION # 39
Which statement about HPE Superdome Flex 280 is true?
- A. It must be equipped with at least 768 GB of memory.
- B. It supports 2 to 8 sockets in 2-socket increments.
- C. it cannot be managed using HPE OneView.
- D. It can support up to two nPars with an external RMC.
Answer: B
NEW QUESTION # 40
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For an uplink set, ports from different modules can be selected
- B. An additional license is required to change the enclosure count
- C. interconnect modules are installed in interconnect bays 1 and 4
- D. Both modules are located in different frames for redundancy
Answer: C
Explanation:
In the HPE Synergy setup shown in the exhibit, the interconnect type is Virtual Connect SE 32Gb FC Module for Synergy with an enclosure count of 1 and interconnect bay set 1. Typically, in such configurations, the interconnect modules are installed in bays 1 and 4 for redundancy. This placement ensures high availability and failover capabilities.
NEW QUESTION # 41
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
- B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- C. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
Answer: B
NEW QUESTION # 42
What is a restriction of using a RoCE network?
- A. It is by default configured as an untagged network and cannot be a part of a network set.
- B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- C. It does not support smart link and private network features.
- D. It does not support Private VLAN and Multicast VLAN.
Answer: C
Explanation:
A restriction of using a RoCE (RDMA over Converged Ethernet) network is that it does not support smart link and private network features. These features are essential for certain network configurations and use cases, but they are not available in RoCE networks, which are designed for high-performance, low-latency communication.
NEW QUESTION # 43
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE Superdome Flex 280
- B. HPE ProLiant DL380 Gen 10 Plus
- C. HPE ProLiant DL560 Gen10
- D. HPE Synergy 480 Gen10 Plus
Answer: B
NEW QUESTION # 44
What is a limitation when creating a server profile?
- A. It is not possible to create shared volumes on demand through a server profile
- B. Administrator cannot define more than 8 connections within a server profile
- C. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- D. ILO management is limited to the integration with Active Directory or LDAP
Answer: D
NEW QUESTION # 45
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?
- A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
- B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
- C. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
- D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
Answer: A
Explanation:
vSAN licenses and vSphere licenses are separate entities. While vSAN licenses cover the storage virtualization aspect of VMware's hyper-converged infrastructure, vSphere licenses are required for the actual hypervisor operations. Therefore, the customer must ensure they have the appropriate vSphere licenses in addition to vSAN licenses for their compute nodes.
NEW QUESTION # 46
......
Focus on HPE0-S59 All-in-One Exam Guide For Quick Preparation: https://passleader.examtorrent.com/HPE0-S59-prep4sure-dumps.html
