SPLK-4001 Exam Questions - Real & Updated Questions PDF
Pass Guaranteed Quiz 2026 Realistic Verified Free Splunk
The SPLK-4001 exam consists of 60 multiple-choice questions that must be answered within 90 minutes. SPLK-4001 exam covers various topics, including the collection and ingestion of metrics data, the creation of dashboards, and the troubleshooting of issues related to metrics data. Candidates are expected to have a good understanding of Splunk Cloud, including its architecture, components, and features. SPLK-4001 exam is a valuable certification for professionals looking to demonstrate their expertise in Splunk Cloud metrics and differentiate themselves in the job market.
NEW QUESTION # 29
What are the best practices for creating detectors? (select all that apply)
- A. View detector in a chart.
- B. View data at highest resolution.
- C. Have a consistent type of measurement.
- D. Have a consistent value.
Answer: A,B,C,D
Explanation:
Explanation
The best practices for creating detectors are:
View data at highest resolution. This helps to avoid missing important signals or patterns in the data that could indicate anomalies or issues1 Have a consistent value. This means that the metric or dimension used for detection should have a clear and stable meaning across different sources, contexts, and time periods. For example, avoid using metrics that are affected by changes in configuration, sampling, or aggregation2 View detector in a chart. This helps to visualize the data and the detector logic, as well as to identify any false positives or negatives. It also allows to adjust the detector parameters and thresholds based on the data distribution and behavior3 Have a consistent type of measurement. This means that the metric or dimension used for detection should have the same unit and scale across different sources, contexts, and time periods. For example, avoid mixing bytes and bits, or seconds and milliseconds.
1: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 2:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 3:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#View-detector-in-a-chart :
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors
NEW QUESTION # 30
What Pod conditions does the Analyzer panel in Kubernetes Navigator monitor? (select all that apply)
- A. Not Scheduled
- B. Pending
- C. Failed
- D. Unknown
Answer: A,B,C,D
Explanation:
Explanation
The Pod conditions that the Analyzer panel in Kubernetes Navigator monitors are:
Not Scheduled: This condition indicates that the Pod has not been assigned to a Node yet. This could be due to insufficient resources, node affinity, or other scheduling constraints1 Unknown: This condition indicates that the Pod status could not be obtained or is not known by the system. This could be due to communication errors, node failures, or other unexpected situations1 Failed: This condition indicates that the Pod has terminated in a failure state. This could be due to errors in the application code, container configuration, or external factors1 Pending: This condition indicates that the Pod has been accepted by the system, but one or more of its containers has not been created or started yet. This could be due to image pulling, volume mounting, or network issues1 Therefore, the correct answer is A, B, C, and D.
To learn more about how to use the Analyzer panel in Kubernetes Navigator, you can refer to this documentation2.
1: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-phase 2:
https://docs.splunk.com/observability/infrastructure/monitor/k8s-nav.html#Analyzer-panel
NEW QUESTION # 31
Which of the following are supported rollup functions in Splunk Observability Cloud?
- A. 1min, 5min, 10min, 15min, 30min
- B. average, latest, lag, min, max, sum, rate
- C. sigma, epsilon, pi, omega, beta, tau
- D. std_dev, mean, median, mode, min, max
Answer: B
Explanation:
Explanation
According to the Splunk O11y Cloud Certified Metrics User Track document1, Observability Cloud has the following rollup functions: Sum: (default for counter metrics): Returns the sum of all data points in the MTS reporting interval. Average (default for gauge metrics): Returns the average value of all data points in the MTS reporting interval. Min: Returns the minimum data point value seen in the MTS reporting interval. Max:
Returns the maximum data point value seen in the MTS reporting interval. Latest: Returns the most recent data point value seen in the MTS reporting interval. Lag: Returns the difference between the most recent and the previous data point values seen in the MTS reporting interval. Rate: Returns the rate of change of data points in the MTS reporting interval. Therefore, option A is correct.
NEW QUESTION # 32
An SRE creates an event feed chart in a dashboard that shows a list of events that meet criteria they specify. Which of the following should they include? (select all that apply)
- A. Events created when a detector clears an alert.
- B. Events created when a detector triggers an alert.
- C. Custom events that have been sent in from an external source.
- D. Random alerts from active detectors.
Answer: A,B,C
Explanation:
According to the web search results1, an event feed chart is a type of chart that shows a list of events that meet criteria you specify. An event feed chart can display one or more event types depending on how you specify the criteria. The event types that you can include in an event feed chart are:
Custom events that have been sent in from an external source: These are events that you have created or received from a third-party service or tool, such as AWS CloudWatch, GitHub, Jenkins, or PagerDuty. You can send custom events to Splunk Observability Cloud using the API or the Event Ingest Service.
Events created when a detector triggers or clears an alert: These are events that are automatically generated by Splunk Observability Cloud when a detector evaluates a metric or dimension and finds that it meets the alert condition or returns to normal. You can create detectors to monitor and alert on various metrics and dimensions using the UI or the API.
Therefore, option A, B, and D are correct.
NEW QUESTION # 33
Which analytic function can be used to discover peak page visits for a site over the last day?
- A. Maximum: Transformation (24h)
- B. Count: (Id)
- C. Lag: (24h)
- D. Maximum: Aggregation (Id)
Answer: A
Explanation:
According to the Splunk Observability Cloud documentation1, the maximum function is an analytic function that returns the highest value of a metric or a dimension over a specified time interval. The maximum function can be used as a transformation or an aggregation. A transformation applies the function to each metric time series (MTS) individually, while an aggregation applies the function to all MTS and returns a single value. For example, to discover the peak page visits for a site over the last day, you can use the following SignalFlow code:
maximum(24h, counters("page.visits"))
This will return the highest value of the page.visits counter metric for each MTS over the last 24 hours. You can then use a chart to visualize the results and identify the peak page visits for each MTS.
NEW QUESTION # 34
Which of the following are correct ports for the specified components in the OpenTelemetry Collector?
- A. gRPC (4459), SignalFx (9166), Fluentd (8956)
- B. gRPC (4317), SignalFx (9080), Fluentd (8006)
- C. gRPC (4000), SignalFx (9943), Fluentd (6060)
- D. gRPC (6831), SignalFx (4317), Fluentd (9080)
Answer: B
Explanation:
Explanation
The correct answer is D. gRPC (4317), SignalFx (9080), Fluentd (8006).
According to the web search results, these are the default ports for the corresponding components in the OpenTelemetry Collector. You can verify this by looking at the table of exposed ports and endpoints in the first result1. You can also see the agent and gateway configuration files in the same result for more details.
1: https://docs.splunk.com/observability/gdi/opentelemetry/exposed-endpoints.html
NEW QUESTION # 35
To refine a search for a metric a customer types host: test-*. What does this filter return?
- A. Only metrics with a value of test- beginning with host.
- B. Only metrics with a dimension of host and a value beginning with test-.
- C. Every metric except those with a dimension of host and a value equal to test.
- D. Error
Answer: B
Explanation:
The correct answer is A. Only metrics with a dimension of host and a value beginning with test-.
This filter returns the metrics that have a host dimension that matches the pattern test-. For example, test-01, test-abc, test-xyz, etc. The asterisk () is a wildcard character that can match any string of characters1 To learn more about how to filter metrics in Splunk Observability Cloud, you can refer to this documentation2.
1: https://docs.splunk.com/Observability/gdi/metrics/search.html#Filter-metrics 2: https://docs.splunk.com/Observability/gdi/metrics/search.html
NEW QUESTION # 36
Which of the following statements are true about the datatable on a chart? (select all that apply)
- A. A user can choose which of the output dimensions are displayed.
- B. By default all dimensions on the output signal are displayed.
- C. Properties cannot be displayed.
- D. By default all metadata on the output signal are displayed.
Answer: A,B
NEW QUESTION # 37
What happens when the limit of allowed dimensions is exceeded for an MTS?
- A. The additional dimensions are dropped.
- B. The datapoint is dropped.
- C. The datapoint is updated.
- D. The datapoint is averaged.
Answer: A
Explanation:
Explanation
According to the web search results, dimensions are metadata in the form of key-value pairs that monitoring software sends in along with the metrics. The set of metric time series (MTS) dimensions sent during ingest is used, along with the metric name, to uniquely identify an MTS1. Splunk Observability Cloud has a limit of 36 unique dimensions per MTS2. If the limit of allowed dimensions is exceeded for an MTS, the additional dimensions are dropped and not stored or indexed by Observability Cloud2. This means that the data point is still ingested, but without the extra dimensions. Therefore, option A is correct.
NEW QUESTION # 38
A customer is sending data from a machine that is over-utilized. Because of a lack of system resources, datapoints from this machine are often delayed by up to 10 minutes. Which setting can be modified in a detector to prevent alerts from firing before the datapoints arrive?
- A. Extrapolation Policy
- B. Max Delay
- C. Duration
- D. Latency
Answer: B
Explanation:
Explanation
The correct answer is A. Max Delay.
Max Delay is a parameter that specifies the maximum amount of time that the analytics engine can wait for data to arrive for a specific detector. For example, if Max Delay is set to 10 minutes, the detector will wait for only a maximum of 10 minutes even if some data points have not arrived. By default, Max Delay is set to Auto, allowing the analytics engine to determine the appropriate amount of time to wait for data points1 In this case, since the customer knows that the data from the over-utilized machine can be delayed by up to 10 minutes, they can modify the Max Delay setting for the detector to 10 minutes. This will prevent the detector from firing alerts before the data points arrive, and avoid false positives or missing data1 To learn more about how to use Max Delay in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/observability/alerts-detectors-notifications/detector-options.html#Max-Delay
NEW QUESTION # 39
When installing OpenTelemetry Collector, which error message is indicative that there is a misconfigured realm or access token?
- A. 503 (SERVICE UNREACHABLE)
- B. 401 (UNAUTHORIZED)
- C. 403 (NOT ALLOWED)
- D. 404 (NOT FOUND)
Answer: B
Explanation:
The correct answer is C. 401 (UNAUTHORIZED).
According to the web search results, a 401 (UNAUTHORIZED) error message is indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector1. A 401 (UNAUTHORIZED) error message means that the request was not authorized by the server due to invalid credentials. A realm is a parameter that specifies the scope of protection for a resource, such as a Splunk Observability Cloud endpoint. An access token is a credential that grants access to a resource, such as a Splunk Observability Cloud API. If the realm or the access token is misconfigured, the request to install OpenTelemetry Collector will be rejected by the server with a 401 (UNAUTHORIZED) error message.
Option A is incorrect because a 403 (NOT ALLOWED) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 403 (NOT ALLOWED) error message means that the request was authorized by the server but not allowed due to insufficient permissions. Option B is incorrect because a 404 (NOT FOUND) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 404 (NOT FOUND) error message means that the request was not found by the server due to an invalid URL or resource. Option D is incorrect because a 503 (SERVICE UNREACHABLE) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 503 (SERVICE UNREACHABLE) error message means that the server was unable to handle the request due to temporary overload or maintenance.
NEW QUESTION # 40
Which of the following statements is true of detectors created from a chart on a custom dashboard?
- A. The alerts will show up in the team landing page.
- B. Changes made to the chart affect the detector.
- C. Changes made to the detector affect the chart.
- D. The detector is automatically linked to the chart.
Answer: D
Explanation:
The correct answer is D. The detector is automatically linked to the chart.
When you create a detector from a chart on a custom dashboard, the detector is automatically linked to the chart. This means that you can see the detector status and alerts on the chart, and you can access the detector settings from the chart menu. You can also unlink the detector from the chart if you want to1 Changes made to the chart do not affect the detector, and changes made to the detector do not affect the chart. The detector and the chart are independent entities that have their own settings and parameters. However, if you change the metric or dimension of the chart, you might lose the link to the detector1 The alerts generated by the detector will show up in the Alerts page, where you can view, manage, and acknowledge them. You can also see them on the team landing page if you assign the detector to a team2 To learn more about how to create and link detectors from charts on custom dashboards, you can refer to this documentation1.
1: https://docs.splunk.com/observability/alerts-detectors-notifications/link-detectors-to-charts.html 2: https://docs.splunk.com/observability/alerts-detectors-notifications/view-manage-alerts.html
NEW QUESTION # 41
Which of the following are true about organization metrics? (select all that apply)
- A. A user can plot and alert on them like metrics they send to Splunk Observability Cloud.
- B. Organization metrics give insights into system usage, system limits, data ingested and token quotas.
- C. Organization metrics count towards custom MTS limits.
- D. Organization metrics are included for free.
Answer: A,B,D
Explanation:
The correct answer is A, C, and D. Organization metrics give insights into system usage, system limits, data ingested and token quotas. Organization metrics are included for free. A user can plot and alert on them like metrics they send to Splunk Observability Cloud.
Organization metrics are a set of metrics that Splunk Observability Cloud provides to help you measure your organization's usage of the platform. They include metrics such as:
Ingest metrics: Measure the data you're sending to Infrastructure Monitoring, such as the number of data points you've sent.
App usage metrics: Measure your use of application features, such as the number of dashboards in your organization.
Integration metrics: Measure your use of cloud services integrated with your organization, such as the number of calls to the AWS CloudWatch API.
Resource metrics: Measure your use of resources that you can specify limits for, such as the number of custom metric time series (MTS) you've created1 Organization metrics are not charged and do not count against any system limits. You can view them in built-in charts on the Organization Overview page or in custom charts using the Metric Finder. You can also create alerts based on organization metrics to monitor your usage and performance1 To learn more about how to use organization metrics in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/observability/admin/org-metrics.html
NEW QUESTION # 42
When writing a detector with a large number of MTS, such as memory. free in a deployment with 30,000 hosts, it is possible to exceed the cap of MTS that can be contained in a single plot. Which of the choices below would most likely reduce the number of MTS below the plot cap?
- A. When creating the plot, add a discriminator.
- B. Add a filter to narrow the scope of the measurement.
- C. Select the Sharded option when creating the plot.
- D. Add a restricted scope adjustment to the plot.
Answer: B
Explanation:
The correct answer is B. Add a filter to narrow the scope of the measurement.
A filter is a way to reduce the number of metric time series (MTS) that are displayed on a chart or used in a detector. A filter specifies one or more dimensions and values that the MTS must have in order to be included. For example, if you want to monitor the memory.free metric only for hosts that belong to a certain cluster, you can add a filter like cluster:my-cluster to the plot or detector. This will exclude any MTS that do not have the cluster dimension or have a different value for it1 Adding a filter can help you avoid exceeding the plot cap, which is the maximum number of MTS that can be contained in a single plot. The plot cap is 100,000 by default, but it can be changed by contacting Splunk Support2 To learn more about how to use filters in Splunk Observability Cloud, you can refer to this documentation3.
1: https://docs.splunk.com/Observability/gdi/metrics/search.html#Filter-metrics 2: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Plot-cap 3: https://docs.splunk.com/Observability/gdi/metrics/search.html
NEW QUESTION # 43
Which analytic function can be used to discover peak page visits for a site over the last day?
- A. Maximum: Transformation (24h)
- B. Count: (Id)
- C. Lag: (24h)
- D. Maximum: Aggregation (Id)
Answer: A
Explanation:
Explanation
According to the Splunk Observability Cloud documentation1, the maximum function is an analytic function that returns the highest value of a metric or a dimension over a specified time interval. The maximum function can be used as a transformation or an aggregation. A transformation applies the function to each metric time series (MTS) individually, while an aggregation applies the function to all MTS and returns a single value. For example, to discover the peak page visits for a site over the last day, you can use the following SignalFlow code:
maximum(24h, counters("page.visits"))
This will return the highest value of the page.visits counter metric for each MTS over the last 24 hours. You can then use a chart to visualize the results and identify the peak page visits for each MTS.
NEW QUESTION # 44
......
Get to the Top with SPLK-4001 Practice Exam Questions: https://passleader.examtorrent.com/SPLK-4001-prep4sure-dumps.html
