Prepare Top Fortinet FCP_FCT_AD-7.2 Exam Study Guide Practice Questions Edition [Q16-Q40]

Prepare Top Fortinet FCP_FCT_AD-7.2 Exam Study Guide Practice Questions Edition

Go to FCP_FCT_AD-7.2 Questions - Try FCP_FCT_AD-7.2 dumps pdf

NEW QUESTION # 16
An administrator wants to simplify remote accesswithout asking users to provideuser credentials Which access control method provides this solution?

• A. SSL VPN
• B. ZTNA full mode
• C. L2TP
• D. ZTNA IP/MAC littering mode

Answer: B

Explanation:
* Simplifying Remote Access:
* The administrator wants to simplify remote access without asking users to provide user credentials.
* Evaluating Access Control Methods:
* ZTNA full mode can provide seamless access by leveraging device identity and posture, eliminating the need for user credentials for each access request.
* Other methods like SSL VPN and L2TP typically require user credentials.
* Conclusion:
* The correct access control method that provides this solution is ZTNA full mode.
References:
* ZTNA section in the FortiGate Infrastructure 7.2 Study Guide.

NEW QUESTION # 17
An administrator installs FortiClient EMS in the enterprise.
Which component is responsible for enforcing protection and checking security posture?

• A. FortiClient EMS tags
• B. FortiClient EMS
• C. FortiClient vulnerability scan
• D. FortiClient

Answer: D

Explanation:
* Understanding FortiClient EMS Components:
* FortiClient EMS manages and configures endpoint security settings, while FortiClient installed on the endpoint enforces protection and checks security posture.
* Evaluating Responsibilities:
* FortiClient performs the actual enforcement of security policies and checks the security posture of the endpoint.
* Conclusion:
* The component responsible for enforcing protection and checking security posture is FortiClient (C).
References:
* FortiClient EMS and endpoint security documentation from the study guides.

NEW QUESTION # 18
An administrator configures ZTNA configuration on the FortiGate. Which statement is true about the firewall policy?

• A. It redirects the client request to the access proxy.
• B. It uses the access proxy.
• C. It only uses ZTNA tags to control access for endpoints.
• D. It defines ZTNA server.

Answer: A

Explanation:
"The firewall policy matches and redirects client requests to the access proxy VIP"https://docs.fortinet.com
/document/fortigate/7.0.0/new-features/194961/basic-ztna-configuration

NEW QUESTION # 19
Refer to the exhibit, which shows the output of the ZTNA traffic log on FortiGate.

What can you conclude from the log message?

• A. The remote user connection does not match the local-in policy.
• B. The remote user connection does not match the ZTNA server configuration.
• C. The remote user connection does not match the ZTNA rule configuration.
• D. The remote user connection does not match the ZTNA firewall policy.

Answer: C

Explanation:
* Observation of ZTNA Traffic Log:
* The log message indicates that the remote user connection was denied due to failure to match a proxy policy.
* Evaluating Log Message:
* The message suggests that the connection does not match the existing ZTNA rule configuration, leading to the denial.
* Conclusion:
* The correct conclusion from the log message is that the remote user connection does not match the ZTNA rule configuration (B).
References:
* ZTNA traffic log analysis and configuration documentation from the study guides.

NEW QUESTION # 20
Which component or device defines ZTNA lag information in the Security Fabric integration?

• A. FortiGate Access Proxy
• B. FortiClient
• C. FortiGate
• D. FortiClient EMS

Answer: D

Explanation:
Understanding ZTNA:
Zero Trust Network Access (ZTNA) requires defining tags for identifying and managing endpoint access.
Evaluating Components:
FortiClient EMS is responsible for managing and defining ZTNA tag information within the Security Fabric.
Conclusion:
The correct component that defines ZTNA tag information in the Security Fabric integration is FortiClient EMS.
Reference:
ZTNA and FortiClient EMS configuration documentation from the study guides.

NEW QUESTION # 21
Refer to the exhibit.

Based on the Security Fabric automation settings, what action will be taken on compromised endpoints?

• A. Endpoints will be quarantined through FortiSwitch
• B. Endpoints will be banned on FortiGate
• C. Endpoints will be quarantined through EMS
• D. An email notification will be sent for compromised endpoints

Answer: C

Explanation:
Based on the Security Fabric automation settings shown in the exhibit:
* The automation stitch is configured with a trigger for a "Compromised Host."
* The action specified for this trigger is "Quarantine FortiClient via EMS."
* This indicates that when an endpoint is detected as compromised, FortiClient EMS will quarantine the endpoint as part of the automation process.
Therefore, the action taken on compromised endpoints will be to quarantine them through EMS.
References
* FortiGate Security 7.2 Study Guide, Automation Stitches and Actions Section
* Fortinet Documentation on Configuring Automation Stitches and Quarantine Actions

NEW QUESTION # 22
An administrator needs to connect FortiClient EMS as a fabric connector to FortiGate What is the prerequisite to get FortiClient EMS lo connect to FortiGate successfully?

• A. Import and verify the FortiClient EMS tool CA certificate on FortiGate.
• B. Revoke and update the FortiClient EMS root CA.
• C. Import and verify the FortiClient client certificate on FortiGate.
• D. Revoke and update the FortiClient client certificate on EMS.

Answer: A

Explanation:
* Connecting FortiClient EMS to FortiGate:
* The administrator needs to establish a connection between FortiClient EMS and FortiGate as a fabric connector.
* Prerequisites for Connection:
* A key prerequisite is the import and verification of the FortiClient EMS tool CA certificate on FortiGate to ensure a trusted connection.
* Conclusion:
* The correct prerequisite for a successful connection is to import and verify the FortiClient EMS tool CA certificate on FortiGate.
References:
* FortiClient EMS and FortiGate connection and certificate management documentation from the study guides.

NEW QUESTION # 23
FortiClient EMS endpoint policies

Refer to the exhibit, which shows multiple endpoint policies on FortiClient EMS. Which policy is applied to the endpoint in the AD group trainingAD

• A. The Training policy
• B. The Default policy because it has the highest priority
• C. The sales policy
• D. Both the Sales and Training policies because their priority is higher than the Default policy

Answer: A

Explanation:
* Observation of Endpoint Policies:
* The exhibit shows multiple endpoint policies with their assigned groups, priority levels, and enabled status.
* Evaluating Policy Assignment:
* The Training policy is specifically assigned to the "trainingAD.training.lab" group, with a higher priority than the Default policy.
* Conclusion:
* The correct policy applied to the endpoint in the AD group "trainingAD" is the Training policy (A).
References:
* FortiClient EMS policy configuration and priority management documentation from the study guides.

NEW QUESTION # 24
Exhibit.

Refer to the exhibits, which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-User* on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?

• A. Update tagging rule logic to enable tag visibility.
• B. Change the endpoint alerts configuration to enable tag visibility.
• C. Change the FortiClient system settings to enable lag visibility.
• D. Change the FortiClient EMS shared settings to enable tag visibility.

Answer: B

Explanation:
* Observation of Exhibits:
* The exhibits show the Zero Trust Tag Monitor on FortiClient EMS and the FortiClient GUI status.
* Remote-Client is tagged as "Remote-Endpoints" on the FortiClient EMS Zero Trust Tag Monitor.
* Enabling Tag Visibility:
* To show the tag on the FortiClient GUI, the endpoint alerts configuration must be adjusted to enable tag visibility.
* Verification:
* The correct action is to change the endpoint alerts configuration to enable tag visibility, ensuring that the tag appears in the FortiClient GUI.
References:
* FortiClient EMS and FortiClient configuration documentation from the study guides.

NEW QUESTION # 25
Refer to the exhibit.

Based on the settings shown in the exhibit what action will FortiClient take when it detects that a user is trying to download an infected file?

• A. Quarantines the infected files and logs all access attempts
• B. Sends the infected file to FortiGuard for analysis
• C. Blocks the infected files as it is downloading
• D. Allows the infected file to download without scan

Answer: D

Explanation:
Block Malicious Website has nothing to do with infected files. Since Realtime Protection is OFF, it will be allowed without being scanned.
Based on the settings shown in the exhibit:
Realtime Protection: OFF
Dynamic Threat Detection: OFF
Block malicious websites: ON
Threats Detected: 75
The "Realtime Protection" setting is crucial for preventing infected files from being downloaded and executed. Since "Realtime Protection" is OFF, FortiClient will not actively scan files being downloaded. The setting "Block malicious websites" is intended to prevent access to known malicious websites but does not scan files for infections.
Therefore, when a user tries to download an infected file, FortiClient will allow the file to download without scanning it due to the Realtime Protection being OFF.
Reference
FortiClient EMS 7.2 Study Guide, Antivirus Protection Section
Fortinet Documentation on FortiClient Real-time Protection Settings

NEW QUESTION # 26
Which two arebenefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)

• A. Licenses are shared among sites
• B. It provides granular access and segmentation.
• C. The fabric connector must use an IP address to connect to FortiClient EMS.
• D. Separate host servers manage each site.

Answer: A,B

Explanation:
* Understanding Multi-Tenancy Mode:
* Multi-tenancy mode allows multiple independent sites or tenants to be managed from a single FortiClient EMS instance.
* Evaluating Benefits:
* Licenses can be shared among sites, making it cost-effective (B).
* It provides granular access and segmentation, allowing for detailed control and separation between tenants (D).
* Eliminating Incorrect Options:
* Separate host servers managing each site (A) is not a feature of multi-tenancy mode.
* The fabric connector's use of an IP address (C) is unrelated to multi-tenancy benefits.
References:
* FortiClient EMS multi-tenancy configuration and benefits documentation from the study guides.

NEW QUESTION # 27
Which two are benefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)

• A. Licenses are shared among sites
• B. It provides granular access and segmentation.
• C. The fabric connector must use an IP address to connect to FortiClient EMS.
• D. Separate host servers manage each site.

Answer: B,C

Explanation:
* Understanding Multi-Tenancy Mode:
* Multi-tenancy mode allows multiple independent sites or tenants to be managed from a single FortiClient EMS instance.
* Evaluating Benefits:
* Licenses can be shared among sites, making it cost-effective (B).
* It provides granular access and segmentation, allowing for detailed control and separation between tenants (D).
* Eliminating Incorrect Options:
* Separate host servers managing each site (A) is not a feature of multi-tenancy mode.
* The fabric connector's use of an IP address (C) is unrelated to multi-tenancy benefits.
References:
* FortiClient EMS multi-tenancy configuration and benefits documentation from the study guides.

NEW QUESTION # 28
Refer to the exhibit.

Based on the Security Fabric automation settings, what action will be taken on compromised endpoints?

• A. Endpoints will be quarantined through FortiSwitch
• B. Endpoints will be banned on FortiGate
• C. Endpoints will be quarantined through EMS
• D. An email notification will be sent for compromised endpoints

Answer: C

Explanation:
Based on the Security Fabric automation settings shown in the exhibit:
The automation stitch is configured with a trigger for a "Compromised Host." The action specified for this trigger is "Quarantine FortiClient via EMS." This indicates that when an endpoint is detected as compromised, FortiClient EMS will quarantine the endpoint as part of the automation process.
Therefore, the action taken on compromised endpoints will be to quarantine them through EMS.
Reference
FortiGate Security 7.2 Study Guide, Automation Stitches and Actions Section Fortinet Documentation on Configuring Automation Stitches and Quarantine Actions

NEW QUESTION # 29
In a ForliSandbox integration, what does the remediation option do?

• A. Wait for FortiSandbox results before allowing files
• B. Deny access to a tile when it sees no results
• C. Alert and notify only
• D. Exclude specified files

Answer: C

Explanation:
Understanding FortiSandbox Integration:
In a FortiSandbox integration, various remediation options are available for handling suspicious files.
Evaluating Remediation Options:
The remediation option for alerting and notifying without blocking access or waiting for results is essential to understand.
Conclusion:
The correct action for the remediation option in this context is to alert and notify only.
Reference:
FortiSandbox integration documentation from the study guides.

NEW QUESTION # 30
Refer to the exhibit.

Based on the FortiClient logs shown in the exhibit which application is blocked by the application firewall?

• A. Facebook
• B. Twitter
• C. Firefox
• D. Internet Explorer

Answer: B

Explanation:
Based on the FortiClient logs shown in the exhibit:
The first log entry shows the application "firefox.exe" trying to access a destination IP, with the threat identified as "Twitter." The action taken by the application firewall is "blocked" with the event type "appfirewall." This indicates that the application firewall has blocked access to Twitter.
Reference
FortiClient EMS 7.2 Study Guide, Application Firewall Logs Section
Fortinet Documentation on Interpreting FortiClient Logs

NEW QUESTION # 31
Exhibit.

Based on the FortiClient logs shown in the exhibit, which endpoint profile policy is currently applied lo the ForliClient endpoint from the EMS server?

• A. Fortinet-Training
• B. Default
• C. Compliance rules default
• D. Default configuration policy c

Answer: A

Explanation:
Observation of Logs:
The logs show a policy named "Fortinet-Training" being applied to the endpoint.
Evaluating Policies:
The log entries indicate that the "Fortinet-Training" policy was received and applied.
Conclusion:
Based on the logs, the currently applied policy on the FortiClient endpoint is "Fortinet-Training".
Reference:
FortiClient EMS policy configuration and log analysis documentation from the study guides.

NEW QUESTION # 32
Refer to the exhibits.


Which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-Users on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?

• A. Change the FortiClient system settings to enable tag visibility
• B. Change the user identity settings to enable tag visibility
• C. Update tagging rule logic to enable tag visibility
• D. Change the endpoint control setting to enable tag visibility

Answer: A

Explanation:
Based on the exhibits provided:
* The "Remote-Client" is tagged as "Remote-Users" in the FortiClient EMS Zero Trust Tag Monitor.
* To ensure that the tag "Remote-Users" is visible in the FortiClient GUI, the system settings within FortiClient need to be updated to enable tag visibility.
* The tag visibility feature is controlled by FortiClient system settings which manage how tags are displayed in the GUI.
Therefore, the administrator needs to change the FortiClient system settings to enable tag visibility.
References
* FortiClient EMS 7.2 Study Guide, Zero Trust Tagging Section
* FortiClient Documentation on Tag Management and Visibility Settings

NEW QUESTION # 33
ZTNA Network Topology

Refer to the exhibits, which show a network topology diagram of ZTNA proxy access and the ZTNA rule configuration.
An administrator runs the diagnose endpoint record list CLI command on FortiGateto check Remote-Client endpoint information, however Remote-Client is not showing up in the endpointrecord list.
What is the cause of this issue?

• A. Remote-Client has not initiated a connection to the ZTNA access proxy.
• B. Remote-Client provided an empty client certificate to connect to the ZTNA access proxy.
• C. Remote-Client provided an invalid certificate to connect to the ZTNA access proxy.
• D. Remote-Client failed the client certificate authentication.

Answer: D

NEW QUESTION # 34
Exhibit.

Based on the logs shown in the exhibit, why did FortiClient EMS tail to install FortiClient on the endpoint?

• A. The remote registry service is not running.
• B. The Windows installer service is not running.
• C. The task scheduler service is not running.
• D. The FortiClient antivirus service is not running.

Answer: C

Explanation:
https://community.fortinet.com/t5/FortiClient/Technical-Note-FortiClient-fails-to-install-from-FortiClient-EMS/ta-p/193680 The deployment service error message may be caused by any of the following. Try eliminating them all, one at a time.
1. Wrong username or password in the EMS profile
2. Endpoint is unreachable over the network
3. Task Scheduler service is not running
4. Remote Registry service is not running
5. Windows firewall is blocking connection

NEW QUESTION # 35
A FortiClient EMS administrator has enabled the compliance rule for the sales department Which Fortinet device will enforce compliance with dynamic access control?

• A. FortiAnalyzer
• B. FortiClient
• C. FortiClient EMS
• D. FortiGate

Answer: D

Explanation:
Understanding Compliance Rules:
The compliance rule for the sales department needs to be enforced dynamically.
Enforcing Compliance:
FortiGate is responsible for enforcing compliance by integrating with FortiClient EMS to apply dynamic access control based on compliance status.
Conclusion:
The Fortinet device that will enforce compliance with dynamic access control is the FortiGate.
Reference:
Compliance and enforcement documentation from FortiGate and FortiClient EMS study guides.

NEW QUESTION # 36
Refer to the exhibit, which shows FortiClient EMS deployment, profiles.

When an administrator creates a deployment profile on FortiClient EMS. which statement about the deployment profile is true?

• A. Deployment-1 will install FortiClient on new AO group endpoints.
• B. Deployment-2 will upgrade FortiClient on both the AD group and workgroup.
• C. Deployment-2 will install FortiClient on both the AD group and workgroup.
• D. Deployment-1 will upgrade FortiClient only on the workgroup.

Answer: B

Explanation:
* Deployment Profiles Analysis:
* Deployment-1 has the "First-Time-Installation" package and is assigned to "All Groups" with a priority of 1 but is not enabled.
* Deployment-2 has the "To-Upgrade" package, is assigned to both "All Groups" and
"trainingAD.training.lab," with a priority of 2 and is enabled.
* Evaluating Deployment-2:
* Deployment-2 will upgrade FortiClient on both "All Groups" and "trainingAD.training.lab" since it is enabled and assigned to these groups. This includes both AD (Active Directory) groups and workgroups.
* Conclusion:
* Since Deployment-2 is set to upgrade FortiClient on all the assigned groups and workgroups, the correct answer is A.
References:
* FortiClient EMS deployment and profile documentation from the study guides.

NEW QUESTION # 37
Refer to the exhibit, which shows the endpoint summary information on FortiClient EMS.

What two conclusions can you make based on the Remote-Client status shown above? (Choose two.)

• A. The endpoint is currently off-net.
• B. The endpoint is configured to support FortiSandbox.
• C. The endpoint has been assigned the Default endpoint policy.
• D. The endpoint is classified as at risk.

Answer: A,C

Explanation:
Based on the Remote-Client status shown in the exhibit:
* Endpoint Policy:The "Policy" field shows "Default," indicating that the endpoint has been assigned the Default endpoint policy.
* Connection Status:The "Location" field shows "Off-Fabric," meaning that the endpoint is currently off the corporate network (off-net).
Therefore, the two conclusions that can be made are:
* The endpoint has been assigned the Default endpoint policy.
* The endpoint is currently off-net.
References
* FortiClient EMS 7.2 Study Guide, Endpoint Summary Information Section
* Fortinet Documentation on Endpoint Policies and Status Indicators

NEW QUESTION # 38
Refer to the exhibit.

Based on the FortiClient tog details shown in the exhibit, which two statements ace true? (Choose two.)

• A. The filename Is Unconfirmed 899290.crdovnload.
• B. The file location is \??\D:\Users\.
• C. The file status is Quarantined
• D. The filename is sent to FortiSandbox for further inspection.

Answer: A,C

NEW QUESTION # 39
Refer to the exhibit.

Based on the settings shown in the exhibit which statement about FortiClient behavior is true?

• A. FortiClient blocks and deletes infected files after scanning them.
• B. FortiClient quarantines infected files and reviews later, after scanning them.
• C. FortiClient copies infected files to the Resources folder without scanning them.
• D. FortiClient scans infected files when the user copies files to the Resources folder

Answer: B

Explanation:
Action On Virus Discovery Warn the User If a Process Attempts to Access Infected Files Quarantine Infected Files. You can use FortiClient to view, restore, or delete the quarantined file, as well as view the virus name, submit the file to FortiGuard, and view logs. Deny Access to Infected Files Ignore Infected Files

NEW QUESTION # 40
......

Free Fortinet Certified Professional Network Security FCP_FCT_AD-7.2 Exam Question: https://passleader.examtorrent.com/FCP_FCT_AD-7.2-prep4sure-dumps.html