Free 350-601 Braindumps Download Updated on Aug 30, 2025 with 696 Questions
Cisco 350-601 Exam Practice Test Questions
Cisco DCCOR 350-601 Practice Test Questions, Cisco DCCOR 350-601 Exam Practice Test Questions
Successfully completing the Cisco 350-601 DCCOR: Implementing Cisco Data Center Core Technologies exam makes you eligible for the following certifications: CCIE Data Center, CCNP Data Center, and Cisco Certified Specialist – Data Center Core.
NEW QUESTION # 118
An engineer changed a configuration and must perform a rollback. Which statement applies to a Cisco Nexus
5600 Series switch?
- A. A user who is assigned to the network-operator user role can perform a rollback.
- B. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.
- C. The configuration rollback functionality is disabled when FCoE is enabled.
- D. Errors are skipped when an atomic rollback type is triggered.
Answer: C
NEW QUESTION # 119
Drag and drop the NAS and NFS concepts from the left onto the definitions on the right.
Answer:
Explanation:
Explanation
NFS
Data storage and file sharing requests are sent and received
The protocol is regularly used on Linux segment
NAS
Software is deployed on a lightweight OS that is embedded in the hardware The vendor-agnostic protocol is supported on any hardware and OS
NEW QUESTION # 120
A customer asks an engineer to develop an orchestration solution to automate repetitive tasks. The customer operations team must integrate the tool with its existing automation framework. The customer asks for the tool to support these requirements:
*The customer's security requirements mandate the use of SSH transport.
*No extra software must be installed on the managed systems.
*The support staff has limited knowledge of scripting languages, so the solution must be easy to read and use declarative language.
Which solution meets these requirements?
- A. Ansible
- B. PowerShell
- C. Chef
- D. Puppet
Answer: A
NEW QUESTION # 121
Refer to the exhibit.
Refer to the exhibit. The MDS-EDGE-Switch and MDS-Core-Switch are configured with NPV and NPIV features The FLOGI from Cisco UCS is received by the MDS-Core-Switch on interface fc1/2. An engineer tried to move all traffic between the MDS-EDGE-Switch and MOS-Core-Switch from interface fc 1/2 to fc1/3, but the attempt failed. Which set of actions completes the configuration?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: A
NEW QUESTION # 122
What is an advantage of NFS as compared to Fibre Channel?
- A. NFS removes the impact of IP overhead.
- B. NFS enables thin provisioning for LUNs.
- C. NFS provides direct access to the underlying storage hardware.
- D. NFS provides the dynamic allocation of storage capacity.
Answer: B
NEW QUESTION # 123
Refer to the exhibit.
What is configured as a result of running these commands?
- A. reverse lookup for outbound packets
- B. IP Source Guard
- C. strict unicast RPF
- D. loose unicast RPF
Answer: C
Explanation:
Explanation
NEW QUESTION # 124
An engineer must analyze packets arriving from a server port on a Cisco Nexus 9000 Series Switch. The packet sniffer is located on a different switch from the one the server is currently connected to. The packet capture must meet these requirements:
- It must capture all incoming packets on the switch port.
- It must capture the first 1000 bytes of the packet to conserve
bandwidth.
Which action must be taken to meet these requirements?
- A. Configure the marker-packet to 1000.
- B. Set rate-limiting to 1000.
- C. Implement an ACL with the packet-length of 1000.
- D. Enable the MTU size of 1000.
Answer: A
Explanation:
On Cisco Nexus 9000 Series Switches, when using ERSPAN (Encapsulated Remote SPAN) to capture traffic across switches, you can limit the size of the mirrored (sniffed) packet using the marker-packet configuration. Setting marker-packet 1000 ensures that only the first 1000 bytes of each packet are mirrored, which helps conserve bandwidth while still capturing relevant header and partial payload information.
MTU size controls the maximum transmission unit, not the SPAN capture size. ACL with packet- length is used for filtering, not for SPAN capture byte limits. Rate-limiting limits traffic throughput, not capture size.
NEW QUESTION # 125
Refer to the exhibit.
An engineer must monitor all LAN traffic on Fabric A from a blade server. Which source should be configured in the test-span monitor session to complete this task?
- A. all vHBAs from the service profile that correspond to this server
- B. all uplink FCoE ports
- C. all uplink Ethernet ports
- D. all vNICs from the service profile that correspond to this server
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter45.html
NEW QUESTION # 126
An engineer configures a storage environment for a customer with high- security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time. Which two configuration sets must be used to meet these requirements? (Chose two.)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
- E. Option E
Answer: A,B
NEW QUESTION # 127
Which three firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose three.)
- A. system
- B. adapter
- C. third-party
- D. BIOS
- E. CIMC
- F. board controller
Answer: B,D,E
NEW QUESTION # 128
A company is running a pair of cisco Nexus 7706 series switches as part of a data center segment. All network engineers have restricted read-Write access to the core switches. A network engineer must a new FCoE VLAN to allow traffic from services toward FCoE storage. Which set of actions must be taken to meet these requirements?
- A. 1. Add the required privilege to the VDC-admin role.
- B. 1. Modify a network-operator role and add the required privileges.
2. Assign a VDC-operator role to a user. - C. Commit the changes to the active user database.
- D. 1. Assign the network-admin role to a user.
2. Commit the role to the switch to the active user database - E. 1. Create a user defined role and add the required privileges.
2. Assign a role to a user.
Answer: A
NEW QUESTION # 129 
Refer to the exhibit A VXLAN data center fabric has three hosts mapped to three different VLANs. Ingress and egress VTEPs perform Layer 2 and Layer 3 lookups VLAN 100 is mapped to VNI 1010 on Lead. Which set of actions allow communication between Host-1 and Host-2?
- A. Enable prefix-based routing under interface vlan of L3 VNI. MAP VLAN 200 to layer 2 VNI 2020 on Leaf2
- B. MAP VLAN 200 to Layer 2 VNI 2020 on Leaf2. Attach Test_Telco_VRF to Layer 2 VNI 1010.
- C. Attach Test_Telco_VRF to Layer 3 VNI 1010. Suppress ARP for Layer 3 VNI under interface NVE
- D. Suppress ARP for Layer 2 VNI under interface NVE. Configure anycast gateway feature on interface vlan of L3 VNI
Answer: B
NEW QUESTION # 130
A network engineer must roll back a configuration change made on a Cisco Nexus 9300 Series Switch. Before the change, the network engineer created a checkpoint named pre-config. The rollback must abort if any errors occur. Which command must be used to accomplish these objectives?
- A. Nexus01# rollback running-config checkpoint pre-config atomic
- B. Nexus01# rollback running-config checkpoint pre-config
- C. Nexus01# rollback running-config checkpoint pre-config stop-at-first-
- D. failure
Nexus01# rollback running-config checkpoint pre-config best-effort
Answer: A
Explanation:
The atomickeyword ensures that the rollback operation will either complete entirely or abort if any errors occur. This provides a consistent configuration state and ensures that no partial changes are applied, meeting the requirement to abort on errors.
NEW QUESTION # 131
Drag and Drop Question
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Answer:
Explanation:
NEW QUESTION # 132
Refer to the exhibit.
What be connected to clear the HA NOT READY status?
- A. management ports
- B. network uplinks
- C. Layer 1-Layer 2 ports
- D. server chassis
Answer: A
Explanation:
The HA NOT READY status on a Cisco Fabric Interconnect typically indicates that the system is not in a state to provide High Availability due to certain connectivity issues. In this case, the status message "No device connected to this Fabric Interconnect" suggests that there is no connectivity through the management ports. Establishing a connection through these ports is essential for the Fabric Interconnect to communicate with other devices in the network and form a High Availability cluster. Once the management ports are connected and properly configured, the HA NOT READY status should be resolved.
References := This explanation is based on standard procedures for addressing High Availability issues in Cisco Data Center environments, as outlined in Cisco's technical documentation and the Implementing and Operating Cisco Data Center Core Technologies (DCCOR) course materials
NEW QUESTION # 133
An engineer must implement access control tor Cisco UCS Manager. The configuration must meet these requirements.
* All users and user groups must be configured using Active Directory.
* User1 must have full access to the Fabric Interconnect infrastructure and network security operations
* User1 must have full access to the storage operations configuration.
Which action must be performed on Cisco UCS to meet the requirements?
- A. Execute a built-in role for the user and LDAP lor the role-mapping for Active Directory.
- B. Create a custom role tor the user and LDAP for the rote-mappings for Active Directory.
- C. Create a custom rote tot the user and RADIUS for the role-mapping for Active Directory.
- D. Execute a built-in role for the user and RADIUS for the role-mapping for Active Directory.
Answer: A
NEW QUESTION # 134
Which two methods are available to Manage an ACI REST API session authentication when a user is unauthenticated?
- A. GET to aaaListDomains
- B. POST to aaaUserLogin
- C. DELETE to aaaLogout
- D. POST to aaaLogin
- E. GET aaaRefresh
Answer: D,E
Explanation:
These API methods enable you to manage session authentication:
aaaLogin -Sent as a POST message, this method logs in a user and opens a session. The message body contains an aaa:User object with the name and password attributes, and the response contains a session token and cookie. If multiple AAA login domains are configured, you must prepend the user's name with apic: domain\\ .
aaaRefresh -Sent as a GET message with no message body or as a POST message with the aaaLogin message body, this method resets the session timer. The response contains a new session token and cookie.
aaaLogout -Sent as a POST message, this method logs out the user and closes the session. The message body contains an aaa:User object with the name attribute. The response contains an empty data structure.
aaaListDomains -Sent as a GET message, this method returns a list of valid AAA login domains. You can send this message without logging in.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/ b_Cisco_APIC_REST_API_Configuration_Guide/ b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html
NEW QUESTION # 135
Refer to the exhibit.
Refer to the exhibit. A network engineer must create an EEM script that saves a copy of the running configuration to bootftash and writes a message to syslog when a user saves the configuration to a Cisco Nexus 9000 Series Switch. Which command completes the configuration set?
- A. policy-default
c. syslog-config - B. event-default
- C. running-config
Answer: C
NEW QUESTION # 136
Drag and Drop Question
A network engineer must implement a telemetry solution to collect real-time structured data in a large-scale network. Drag and drop the actions from the left into the order on the right to implement the solution. Not all actions are used.
Answer:
Explanation:
NEW QUESTION # 137
......
Cisco 350-601 exam covers a wide range of topics, including network infrastructure, virtualization, storage network, automation, and security. Candidates are expected to have a thorough understanding of these topics and demonstrate their ability to implement and manage them in a data center environment. 350-601 exam also tests the candidates' knowledge of Cisco's data center technologies, such as Cisco Application Centric Infrastructure (ACI) and Cisco Unified Computing System (UCS).
Updated Verified 350-601 dumps Q&As - Pass Guarantee or Full Refund: https://passleader.examtorrent.com/350-601-prep4sure-dumps.html
