Best Fortinet NSE7_LED-7.0 Exam Practice Material Updated on May 15, 2025 [Q16-Q39]

Best Fortinet NSE7_LED-7.0 Exam Practice Material Updated on May 15, 2025

New NSE7_LED-7.0 Actual Exam Dumps,  Fortinet Practice Test

Fortinet NSE7_LED-7.0 Exam is a challenging exam that requires a thorough understanding of LAN Edge technologies and the Fortinet product portfolio. Candidates must have hands-on experience with Fortinet products and solutions, and they must be able to apply this knowledge to real-world scenarios. Passing NSE7_LED-7.0 exam is a significant achievement that demonstrates a high level of expertise in LAN Edge technologies and the ability to deliver effective solutions for businesses of all sizes.

Fortinet NSE7_LED-7.0 exam consists of multiple-choice questions and simulations that test the candidate's knowledge of Fortinet's security solutions. NSE7_LED-7.0 exam covers a wide range of topics, including network security design, implementation, and configuration, Fortinet's security solutions, and troubleshooting. NSE7_LED-7.0 exam is designed to evaluate the candidate's ability to design and implement Fortinet's security solutions in a real-world scenario.

 

NEW QUESTION # 16
An administrator has configured an SSID in bridge mode for corporate employees All APs are online and provisioned using default AP profiles Employees are unable to locate the SSID to conned Which two configurations can the administrator verify? (Choose two)

• A. Verify that the broadcast SSID option is enabled in the SSID configuration
• B. Verify that the SSID is manually applied on AP profiles for both 2 4 GHz and 5 GHz radios
• C. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled
• D. Verify that the SSID to an AP group that should be broadcasting the SSID is applied

Answer: A,B

Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-enable-and-disable-broadcast-of-SSID/ta- p/191840

NEW QUESTION # 17
Refer to the exhibit.

Examine the FortiManager information shown in the exhibit
Which two statements about the FortiManager status are true'' (Choose two)

• A. FortiSwitch is not authorized
• B. FortiSwitch is authorized and offline
• C. FortiSwitch manager is working in central management mode
• D. FortiSwitch manager is working in per-device management mode

Answer: B,C

Explanation:
Explanation
According to the FortiManager Administration Guide, "Central management mode allows you to manage all FortiSwitch devices from a single interface on the FortiManager device." Therefore, option C is true because the exhibit shows that the FortiSwitch manager is enabled and the FortiSwitch device is managed by the FortiManager device. Option D is also true because the exhibit shows that the FortiSwitch device status is offline, which means that it is not reachable by the FortiManager device, but it is authorized, which means that it has been added to the FortiManager device. Option A is false because per-device management mode allows you to manage each FortiSwitch device individually from its own web-based manager or CLI, which is not the case in the exhibit. Option B is false because the FortiSwitch device is authorized, as explained above.

NEW QUESTION # 18
Refer to the exhibit. Examine the IPsec VPN phase 1 configuration shown in the exhibit. An administrator wants to use certificate-based authentication for an IPsec VPN user.
Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)

• A. In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)
• B. Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate
• C. Enable XAUTH on the IPsec VPN tunnel
• D. Import the CA that signed the user certificate
• E. In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN

Answer: B,D,E

NEW QUESTION # 19
A wireless network in a school provides guest access using a captive portal to allow unregistered users to self- register and access the network The administrator is requested to update the existing configuration to provide captive portal authentication through a secure connection (HTTPS) Which two changes must the administrator make to enforce HTTPS authentication"? (Choose two >

• A. Disable HTTP administrative access on the guest SSID to enforce HTTPS connection
• B. Enable HTTP redirect in the user authentication settings
• C. Create a new SSID with the HTTPS captive portal URL
• D. Update the captive portal URL to use HTTPS on FortiGate and FortiAuthenticator

Answer: B,D

Explanation:
According to the FortiGate Administration Guide, "To enable HTTPS authentication, you must enable HTTP redirect in the user authentication settings. This redirects HTTP requests to HTTPS. You must also update the captive portal URL to use HTTPS on both FortiGate and FortiAuthenticator." Therefore, options B and D are true because they describe the changes that the administrator must make to enforce HTTPS authentication for the captive portal. Option A is false because creating a new SSID with the HTTPS captive portal URL is not required, as the existing SSID can be updated with the new URL. Option C is false because disabling HTTP administrative access on the guest SSID will not enforce HTTPS connection, but rather block HTTP connection.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-secure-authentication-HTTPS-on-a- FortiGate/ta-p/192486

NEW QUESTION # 20
Refer to the exhibits.

In the WTP profile configuration shown in the exhibit, the AP profile is assigned to two FAP-320 APs that are installed in an open plan office.

The first AP has 32 clients associated with the 5 GHz radios and 22 clients associated with the 2.4 GHz radio.
The second AP has 12 clients associated with the 5 GHz radios and 20 clients associated with the 2.4 GHz radio.
A dual-band-capable client enters the office near the first AP and the first AP measures the new client at -33 dBm signal strength. The second AP measures the new client at 2 -43 dBm signal strength.
If the new client attempts to connect to the corporate wireless network, with which AP radio will the client be associated?

• A. The first AP 5 GHz interface.
• B. The first AP 2.4 GHz interface.
• C. The second AP 5 GHz interface.
• D. The second AP 2.4 GHz interface.

Answer: C

NEW QUESTION # 21
Which two pieces of information can the diagnose test authserver ldap command provide? (Choose two.)

• A. It displays whether the user credentials are correct
• B. It displays whether the admin bind user credentials are correct
• C. It displays the LDAP groups found for the user
• D. It displays the LDAP codes returned by the LDAP server

Answer: A,C

NEW QUESTION # 22
Which FortiSwitch VLANs are automatically created on FortGate when the first FortiSwitch device is discovered1?

• A. fortilink. quarantine erspan voice video and onboarding
• B. default quarantine, rspan voice video onboarding and nac_segment
• C. access, quarantine, rspan. voice, video, and onboarding
• D. default quarantine rspan voice video and nac_segment

Answer: A

Explanation:
Explanation
According to the FortiGate Administration Guide, "When you add a FortiSwitch device to the Security Fabric, FortiGate automatically creates the following VLANs on theFortiSwitch device: fortilink, quarantine, erspan, voice, video, and onboarding." Therefore, option D is true because it lists the FortiSwitch VLANs that are automatically created on FortiGate when the first FortiSwitch device is discovered. Option A is false because default and nac_segment are not among the automatically created VLANs. Option B is false because access and rspan are not among the automatically created VLANs. Option C is false because default and nac_segment are not among the automatically created VLANs.

NEW QUESTION # 23
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

• A. Access VLAN is enabled on the VLAN
• B. The FortiSwitch MAC address table is missing entries
• C. The FortiGate ARP table is missing entries
• D. The native VLAN configured on the ports is incorrect

Answer: A

NEW QUESTION # 24
You are investigating a report of poor wireless performance in a network that you manage. The issue is related to an AP interface in the 5 GHz range You are monitoring the channel utilization over time.
What is the recommended maximum utilization value that an interface should not exceed?

• A. 95%
• B. 75%
• C. 65%
• D. 85%

Answer: B

NEW QUESTION # 25
An administrator is testing the connectivity for a new VLAN. The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate.
While testing, the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices. The administrator also noticed that inter-VLAN communication works. However, intra-VLAN communication does not work.
Which scenario is likely to cause this issue?

• A. Access VLAN is enabled on the VLAN
• B. The FortiSwitch MAC address table is missing entries
• C. The FortiGate ARP table is missing entries
• D. The native VLAN configured on the ports is incorrect

Answer: A

NEW QUESTION # 26
Refer to the exhibits.

The CLI output shows a FortiGate configuration supporting a remote AP in an employee's home. The employee requires access to resources located on the company network, including the database server and AD server. The employee is trying to print to a printer connected in their home, but is not able to.
Which two solutions would resolve the issue? (Choose two.)

• A. Configure the FAPU431F-EmployeeHome WTP profile to enable split tunneling to the AP subnet using the command set split-tunneling-acl-local-ap-subnet enable.
• B. Configure the EmployeeHome VAP profile to disable host isolation using the command set intra-vap- privacy disable.
• C. Configure the EmployeeHome VAP profile for local bridging using the command set local-bridging enable.
• D. Configure the FARU431F-EmployeeHome wtp-profile to add a split tunneling ACL with a destination subnet of 192.168.1.1/24, using the command set dest-ip 192.168.1.1/24.

Answer: A,D

NEW QUESTION # 27
Refer to the exhibits.

Examine the debug output and the SSL VPN configuration shown in the exhibits.

An administrator has configured SSL VPN on FortiGate. To improve security, the administrator enabled Required Client Certificate on the SSL VPN configuration page. However, a user is unable to successfully authenticate to SSL VPN.
Which configuration change should the administrator make to fix the problem?

• A. Enable Redirect HTTP to SSL-VPN on the SSL VPN configuration page.
• B. Import the CA that signed the SSL VPN Server Certificate to FortiGate.
• C. Import the CA that signed the user certificate to FortiGate.
• D. Set the user certificate as the Server Certificate on the SSL VPN configuration page.

Answer: C

NEW QUESTION # 28
What is the purpose of enabling Windows Active Directory Domain Authentication on FortiAuthenticator?

• A. It enables FortiAuthenticator to import users from Windows AD
• B. It enables FortiAuthenticator to register itself as a Windows trusted device to proxy authentication using Kerberos
• C. It enables FortiAuthenticator to use Windows administrator credentials to perform an LDAP lookup for a user search
• D. It enables FortiAuthenticator to use a Windows CA certificate when authenticating RADIUS users

Answer: B

Explanation:
According to the FortiAuthenticator Administration Guide2, "Windows Active Directory domain authentication enables FortiAuthenticator to join a Windows Active Directory domain as a machine entity and proxy authentication requests using Kerberos." Therefore, option D is true because it describes the purpose of enabling Windows Active Directory domain authentication on FortiAuthenticator. Option A is false because FortiAuthenticator does not need Windows administrator credentials to perform an LDAP lookup for a user search. Option B is false because FortiAuthenticator does not use a Windows CA certificate when authenticating RADIUS users, but rather its own CA certificate. Option C is false because FortiAuthenticator does not import users from Windows AD, but rather synchronizes them using LDAP or FSSO.

NEW QUESTION # 29
Refer to the exhibit.

Examine the debug output shown in the exhibit
Which two statements about the RADIUS debug output are true'' (Choose two)

• A. User authentication failed
• B. The user student belongs to the SSLVPN group
• C. User authentication succeeded using MSCHAP
• D. The RADIUS server sent a vendor-specific attribute in the RADIUS response

Answer: B,D

NEW QUESTION # 30
Which two statements about FortiSwitch trunks are true? (Choose two.)

• A. A trunk is a link aggregation group interface.
• B. Trunks do not support tagged Ethernet frames.
• C. By default, when connecting two FortiSwitch devices to each other, a trunk is automatically created between the switches.
• D. LACP is not supported.

Answer: A,C

NEW QUESTION # 31
Refer to the exhibit.

Examine the FortiGate user group configuration and the Windows AD LDAP group membership information shown in the exhibit FortiGate is configured to authenticate SSL VPN users against Windows AD using LDAP The administrator configured the SSL VPN user group for SSL VPN users However the administrator noticed that both the student and j smith users can connect to SSL VPN Which change can the administrator make on FortiGate to restrict the SSL VPN service to the student user only?

• A. In the SSL VPN user group configuration change Type to Fortinet Single Sign-On (FSSO)
• B. In the SSL VPN user group configuration set Group Nam to CN-SSLVPN, CN="users, DC-trainingAD, DC-training, DC-lab
• C. In the SSL VPN user group configuration set Group Name to ::;=Domain users.CN-Users/DC=trainingAD, DC-training, DC=lab.
• D. In the SSL VPN user group configuration, change Name to cn=sslvpn, CN=users, DC=trainingAD, Detraining, DC-lab.

Answer: B

Explanation:
Explanation
According to the FortiGate Administration Guide, "The Group Name is the name of the LDAP group that you want to use for authentication. The name must match exactly the name of the LDAP group on the LDAP server." Therefore, option A is true because it will set the Group Name to match the LDAP group that contains only the student user. Option B is false because changing the Name will not affect the authentication process, as it is only a local identifier for the user group on FortiGate. Option C is false because setting the Group Name to Domain Users will include all users in the domain, not just the student user. Option D is false because changing the Type to FSSO will require a different configuration method and will not solve the problem.

NEW QUESTION # 32
Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning'?

• A. From a DNS server using A or AAAA records
• B. From an LDAP server using a simple bind operation
• C. From a DHCP server using options 240 and 241
• D. From a TFTP server

Answer: C

Explanation:
FG retrieves the FortiManager IP address or FQDN through DHCP options 240 or 241 respectively.

NEW QUESTION # 33
What is the purpose of enabling Windows Active Directory Domain Authentication on FortiAuthenticator?

• A. It enables FortiAuthenticator to import users from Windows AD
• B. It enables FortiAuthenticator to register itself as a Windows trusted device to proxy authentication using Kerberos
• C. It enables FortiAuthenticator to use Windows administrator credentials to perform an LDAP lookup for a user search
• D. It enables FortiAuthenticator to use a Windows CA certificate when authenticating RADIUS users

Answer: B

Explanation:
Windows Active Directory domain authentication enables FortiAuthenticator to join a Windows Active Directory domain as a machine entity and proxy authentication requests using Kerberos.

NEW QUESTION # 34
Refer to the exhibit.

Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

• A. FortiSwitch cannot authenticate multiple devices connected to the same port
• B. FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password
• C. FortiSwitch will assign non-802 1X devices to the onboarding VLAN
• D. All EAP messages will be terminated on FortiSwitch

Answer: C

Explanation:
Explanation
According to the FortiSwitch Administration Guide, "If a device does not support 802.1X authentication, you can configure the switch to assign the device to an onboarding VLAN. The onboarding VLAN is a separate VLAN that you can use to provide limited network access to non-802.1X devices." Therefore, option C is true because it describes the behavior of FortiSwitch when the security profile shown in the exhibit is assigned to all ports. Option A is false because FortiSwitch can authenticate multiple devices connected to the same port using MAC-based or MAB-EAP modes. Option B is false because FortiSwitch will not try to authenticate non-802.1X devices using the device MAC address as the username and password, but rather use MAC authentication bypass (MAB) or EAP pass-through modes. Option D is false because all EAP messages will be terminated on FortiGate, not FortiSwitch, when using 802.1X authentication.

NEW QUESTION # 35
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

• A. Access VLAN is enabled on the VLAN
• B. The FortiSwitch MAC address table is missing entries
• C. The FortiGate ARP table is missing entries
• D. The native VLAN configured on the ports is incorrect

Answer: B

Explanation:
Explanation
According to the scenario, the devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate, which means that the devices are not blocked by any security policy. The devices can ping FortiGate and FortiGate can ping the devices, which means that the IP connectivity is working. Inter-VLAN communication works, which means that the routing between VLANs is working. However, intra-VLAN communication does not work, which means that the switching within the VLAN is not working. Therefore, option C is true because the FortiSwitch MAC address table is missing entries, which means that the FortiSwitch does not know how to forward frames to the destination MAC addresses within the VLAN. Option A is false because access VLAN is enabled on the VLAN, which means that the VLAN ID is added to the frames on ingress and removed on egress. This does not affect intra-VLAN communication. Option B is false because the native VLAN configured on the ports is incorrect, which means that the frames on the native VLAN are not tagged with a VLAN ID. This does not affect intra-VLAN communication. Option D is false because the FortiGate ARP table is missing entries, which means that FortiGate does not know how to map IP addresses to MAC addresses. This does not affect intra-VLAN communication.

NEW QUESTION # 36
Which two pieces of information can the diagnose test authserver ldap command provide?
(Choose two.)

• A. It displays whether the user credentials are correct
• B. It displays whether the admin bind user credentials are correct
• C. It displays the LDAP groups found for the user
• D. It displays the LDAP codes returned by the LDAP server

Answer: A,C

Explanation:

NEW QUESTION # 37
Which three FortiOS tools can you use to troubleshoot RADIUS authentication issues? (Choose three.)

• A. You can enable debug for the fssod process to view RADIUS authentication details.
• B. You can check the Firewall Users widget to view the list of active RADIUS users.
• C. You can use the diagnose test authserver radius command to verify RADIUS server configuration, user credentials, and user group membership.
• D. You can use the diagnose test application radiusd command to verify the RADIUS server configuration, user credentials, and user group membership.
• E. You can enable debug for the fnbamd process to view RADIUS authentication details.

Answer: C,D,E

Explanation:
Fortinet's official documentation, including the FortiOS Handbook and NSE 7 training materials, provides detailed guidance on troubleshooting RADIUS authentication issues. The three tools listed below are explicitly supported for diagnosing RADIUS-related problems in FortiOS:
* B. You can use the diagnose test authserver radius command to verify RADIUS server configuration, user credentials, and user group membership.This command is a well-documented troubleshooting tool in the FortiOS CLI Reference and Technical Documentation. It allows administrators to manually test RADIUS authentication by specifying the RADIUS server, username, and password. The output provides details on whether the authentication succeeds or fails, along with information about group membership and server reachability. For example:
bash
CollapseWrapCopy
diagnose test authserver radius <server_name> <username> <password>
This is a critical tool for verifying the RADIUS server's configuration and user authentication flow.
* D. You can enable debug for the fnbamd process to view RADIUS authentication details.The fnbamd process (FortiNet Authentication Daemon) handles non-local authentication protocols like RADIUS and LDAP in FortiOS. Enabling debug for this process provides real-time logs of the authentication exchange between the FortiGate and the RADIUS server. This is officially recommended in Fortinet's troubleshooting guides for advanced diagnostics. The command sequence is:
bash
CollapseWrapCopy
diagnose debug application fnbamd -1
diagnose debug enable
After testing, you can disable debugging with diagnose debug disable. This tool is invaluable for identifying issues such as misconfigured shared secrets, timeouts, or attribute mismatches.
* E. You can use the diagnose test application radiusd command to verify the RADIUS server configuration, user credentials, and user group membership.The radiusd process relates to the RADIUS daemon on the FortiGate, and this diagnostic command tests the RADIUS server's operational status and authentication functionality. While less commonly highlighted than diagnose test authserver radius, it is referenced in Fortinet's CLI documentation for deeper troubleshooting of the RADIUS service itself. It provides detailed output about the server's response and can help isolate issues specific to the RADIUS protocol implementation.
Why not A and C?
* A. You can enable debug for the fssod process to view RADIUS authentication details.The fssod process relates to FortiSSO (Single Sign-On) and is primarily used for FSSO-based authentication, not direct RADIUS troubleshooting. While it may log some authentication-related events in specific SSO scenarios, it is not a standard tool for RADIUS diagnostics according to Fortinet's official documentation. Thus, it is not a correct choice here.
* C. You can check the Firewall Users widget to view the list of active RADIUS users.While the Firewall Users widget (available in the FortiOS GUI underUser & Authentication > Firewall Users) shows a list of authenticated users, it is a monitoring tool, not a troubleshooting tool. It does not provide diagnostic details about RADIUS authentication failures or server issues, making it insufficient for this purpose per Fortinet's troubleshooting methodology.
Source Verification
The answers are derived from official Fortinet resources, including:
* FortiOS 7.0 CLI Reference(diagnose commands section)
* FortiOS Handbook: Authentication(RADIUS troubleshooting section)
* NSE 7 - LAN Edge 7.0 training materials (authentication diagnostics module) These tools (B, D, E) align with Fortinet's recommended practices for diagnosing RADIUS authentication issues effectively.

NEW QUESTION # 38
Refer to the exhibits

The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?

• A. In the SSIDs section enable Tunnel
• B. Enable multiple channels in the Channels section and enable Radio Resource Provision
• C. Enable one channel in the Channels section
• D. In the SSIDs section enable Manual and assign the networks manually

Answer: C

Explanation:
Explanation
According to the FortiManager Administration Guide1, "To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled." Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.

NEW QUESTION # 39
......

Fortinet NSE 7 - LAN Edge 7.0 is the latest version of the Fortinet Network Security Expert (NSE) certification program that focuses on advanced skills and knowledge for network security professionals. The Fortinet NSE 7 - LAN Edge 7.0 certification is designed to validate the knowledge and skills required to deploy, configure, and troubleshoot Fortinet security solutions in a LAN Edge environment. The NSE7_LED-7.0 certification exam is the key to achieving this certification.

 

Study HIGH Quality NSE7_LED-7.0 Free Study Guides and Exams Tutorials: https://passleader.examtorrent.com/NSE7_LED-7.0-prep4sure-dumps.html